Home | Profile | Products | Show Room and Sales Centre | ServicesContact Us
 

Raise Your Living Standard with Strong Steel Roofing Products

 

Our Products>>Eagle Design

Smart Appearance, Aesthetic Creation
( Beautiful Strong Durable Reliable Economical)

Indoor
Eagle Design - Indoor

Model: SSS 753

   

 

*All units are in mm.
Cover
Width
Coil
Width
Section
Interior
Max
Height
Module
Size
Fore
Edge
Thickness
753 886 187.5 30 355 50 0.346 & above

Installed on a house.

Ridge Cap. Encaustic Design

Indoor

Model: SSS 320

   

 

Installation of Eagle-designed Roofing Sheets

(1) For frame system of Eagle Design roofing sheets, you can choose steel or wood structure as your wish.

(2) Eaves batten is fixed by taking 100 mm from the front edge of the fascia board. This batten size is 25 mm thicker than  
     the others.

(3) Then set and tack the second batten to 200 mm from the eaves batten.

(4) The rest battens are arranged at equal distance according to the module length of tile steps.

(5) Install the roof sheets overlapping one upon another at regular intervals from left to right.

(6) Fix the tile on batten with screw at the front of each tile step.

(7) Ridge caps of encaustic design in association with eagle tile have to be fixed as shown in the picture.
     Installation as mentioned above can create a beautiful and strong roof at the most reasonable cost.



 

Strong Steel Products, Roofing Products

Head Office & Factory : No. 83/84, Pyin Si Min Thar Gyi St., Hlaing Thar Yar Industrial Zone (4), Hlaing Thar Yar Tsp., Yangon, Myanmar. Tel : (0951) 685160, 685161, 685323, 726716 Fax (0951) 685164

Email : , Website : http://www.strongsteelproduct.com

Copyright © 2005-2006 STRONG Company Limited. All Rights Reserved.